Globally occurring pelagiphage infections create ribosome-deprived cells.

Phages play an essential role in controlling bacterial populations. Those infecting Pelagibacterales (SAR11), the dominant bacteria in surface oceans, have been studied in silico and by cultivation attempts. However, little is known about the quantity of phage-infected cells in the environment. Using fluorescence in situ hybridization techniques, we here show pelagiphage-infected SAR11 cells across multiple global ecosystems and present evidence for tight community control of pelagiphages on the SAR11 hosts in a case study. Up to 19% of SAR11 cells were phage-infected during a phytoplankton bloom, coinciding with a ~90% reduction in SAR11 cell abundance within 5 days. Frequently, a fraction of the infected SAR11 cells were devoid of detectable ribosomes, which appear to be a yet undescribed possible stage during pelagiphage infection. We dubbed such cells zombies and propose, among other possible explanations, a mechanism in which ribosomal RNA is used as a resource for the synthesis of new phage genomes. On a global scale, we detected phage-infected SAR11 and zombie cells in the Atlantic, Pacific, and Southern Oceans. Our findings illuminate the important impact of pelagiphages on SAR11 populations and unveil the presence of ribosome-deprived zombie cells as part of the infection cycle.

Biodegradable plastics in Mediterranean coastal environments feature contrasting microbial succession.

Plastic pollution of the ocean is a top environmental concern. Biodegradable plastics present a potential "solution" in combating the accumulation of plastic pollution, and their production is currently increasing. While these polymers will contribute to the future plastic marine debris budget, very little is known still about the behavior of biodegradable plastics in different natural environments. In this study, we molecularly profiled entire microbial communities on laboratory confirmed biodegradable polybutylene sebacate-co-terephthalate (PBSeT) and polyhydroxybutyrate (PHB) films, and non-biodegradable conventional low-density polyethylene (LDPE) films that were incubated in situ in three different coastal environments in the Mediterranean Sea. Samples from a pelagic, benthic, and eulittoral habitat were taken at five timepoints during an incubation period of 22 months. We assessed the presence of potential biodegrading bacterial and fungal taxa and contrasted them against previously published in situ disintegration data of these polymers. Scanning electron microscopy imaging complemented our molecular data. Putative plastic degraders occurred in all environments, but there was no obvious "core" of shared plastic-specific microbes. While communities varied between polymers, the habitat predominantly selected for the underlying communities. Observed disintegration patterns did not necessarily match community patterns of putative plastic degraders.

Incommensurate magnetic structure of CrAs at low temperatures and high pressures.

The magnetic structure of chromium arsenide CrAs is studied with neutron powder diffraction at ambient pressure in the temperature range 1.5-300 K as well as with neutron single-crystal diffraction at 2 K and 0.12 GPa. The material undergoes an anti-isostructural phase transition at TN = 267 K and atmospheric conditions, in which both orthorhombic phases have the same space-group symmetry (Pnma, Z = 4) but different distortions of the parent hexagonal structure of the NiAs type (P63/mmc, Z = 2). The magnetic structure below TN is incommensurate with the propagation vector k = (0, 0, kc). At ambient pressure, the component kc decreases from kc = 0.3807 (7) at 260 K to kc = 0.3531 (6) at 50 K. Below this temperature, it is basically constant. With increasing pressure at 2 K, kc is also constant within standard uncertainties [kc = 0.353 (2)]. For the analysis of the magnetic structure, a group-theoretical approach based on the space group of the nuclear structure and its subgroups is used. To avoid falling into false minima in the refinements, a random search for magnetic moments in the models is implemented. In the literature, the magnetic structure has been determined on the basis of powder diffraction data as a double helix propagating along the c axis. Although this double-helical model leads to satisfactory agreement factors for our powder data, it does not reproduce the intensities of the magnetic satellite reflections measured on single-crystal data in a satisfactory way and can therefore be discarded. Instead, several other models are found that lead to better agreement. Each of them is spiral-like with directional components in all three directions and with no spin-density wave character that would cause a non-constant magnetic moment. In all these models, the ordering of the spins is neither a pure helix nor a pure cycloid. Instead, the unit vectors of the spin rotation planes make an angle α, 0° < α < 90°, with respect to the c* direction. The model in superspace group P21.1'(α0γ)0s yields the best agreement factors in the refinements of the neutron single-crystal and powder diffraction data. This model is unique as it is the only one in which all the magnetic moments rotate with the same chirality.

Bacterial diversity of biofilms on polyhydroxybutyrate exposed to marine conditions: Ex-situ vs. in-situ tests.

Biofilms form on any available surface and, depending on the characteristics of the material and the environmental conditions, biodegradation can take place. We compared the bacterial composition of polyhydroxybutyrate (PHB)-related biofilm communities from marine ex-situ and in-situ tests to assess the differences in diversity and abundance between these two biofilms. This comparison will help to better assess the transferability of tank tests to real-life scenarios. The in-situ tests were set up in the Mediterranean Sea on the Island of Elba, Italy where PHB-tensile bars were lodged in the sediments. This created a water-exposed aerobic and mud-planted anaerobic scenario. The ex-situ tests were modeled after in-situ tests and performed in temperature-controlled tanks. The PHB-related biofilms were harvested after 240 days of exposure along with planktonic bacteria, and particle- and sediment-related biofilm. The bacterial composition was elucidated using 16S rDNA sequencing. Biofilms harvested from the in-situ test were more diverse, less even, and contained more rare species compared to biofilms from the ex-situ test. The PHB-related biofilm was characterized by a higher abundance of the bacterial order Desulfobacterales. The composition of PHB-related biofilm varied significantly between the two tests and between aerobic and anaerobic conditions. The composition of PHB-related biofilm was significantly different from planktonic bacteria, particle, and sediment-related biofilm, showing the influence of PHB on the biofilm composition. Thus, the ex-situ tank test for PHB degradation cannot, in terms of bacterial composition, simulate the in-situ conditions to their full extent.

Site dependence of the magnetocaloric effect in Mn5-x Fe x Si3.

The nuclear and magnetic structures of Mn3Fe2Si3 are investigated in the temperature range from 20 to 300 K. The magnetic properties of Mn3Fe2Si3 were measured on a single crystal. The compound undergoes a paramagnetic to antiferromagnetic transition at T N2 ≃ 120 K and an antiferromagnetic to antiferromagnetic transition at T N1 ≃ 69 K. A similar sequence of magnetic phase transitions is found for the parent compound Mn5Si3 upon temperature variation, but the field-driven transition observed in Mn5Si3 is not found in Mn3Fe2Si3, resulting in a strongly reduced magnetocaloric effect. Structurally, the hexagonal symmetry found for both compounds under ambient conditions is preserved in Mn3Fe2Si3 through both magnetic transitions, indicating that the crystal structure is only weakly affected by the magnetic phase transition, in contrast to Mn5Si3 where both transitions distort the nuclear structure. Both compounds feature a collinear high-temperature magnetic phase AF2 and transfer into a non-collinear phase AF1 at low temperature. While one of the distinct crystallographic sites remains disordered in the AF2 phase in the parent compound, the magnetic structure in the AF2 phase involves all magnetic atoms in Mn3Fe2Si3. These observations imply that the distinct sites occupied by the magnetic atoms play an important role in the magnetocaloric behaviour of the family.

Disintegration half-life of biodegradable plastic films on different marine beach sediments.

The seafloor is considered the major sink for plastic debris in the world's oceans. Biodegradable polymers are available on the market as a substitute for conventional plastic and could potentially end up in the same environment. To gain more insight into the effects of different sediments on the degradation rate of biodegradable plastic we performed two iterative seawater tank experiments. First, to test the effect of sediment grain size, film of Mater-Bi HF03V, a blend of thermoplastic starch and biodegradable polyesters, was placed on the surface of mud as well as on four different grain size fractions of beach sand. Disintegration half-life was shortest on mud (139 days) and increased with the grain size of the beach sediment fractions (63-250 µm: 296 days; 250-500 µm: 310 days; 500-1,000 µm: 438 days; >1,000 µm: 428 days). We assume that the higher surface-to-volume ratio in fine sediment compared to coarse sediment led to a higher bacterial abundance and thus to faster disintegration rates. In a follow-up experiment, the <500 µm fraction of sediment from four different beaches around Isola d'Elba, Italy, was used to test plastic disintegration as above. Additionally, polyhydroxybutyrate (PHB, MIREL P5001) was used as a positive control and high-density polyethylene (HD-PE) as a negative control. No disintegration was observed for HD-PE. Mater-Bi HF03V and PHB disintegrated significantly differently on sediment from different sites, with half-lives of Mater-Bi HF03V ranging from 72 to 368 days and of PHB from 112 to 215 days. Here, the half-life was shortest on slightly coarser sediment and at potentially anthropogenically impacted sites. We assume that the effect of the grain size on the disintegration rate was masked by other parameters influencing the microbial community and activity. Understanding the parameters driving biodegradation is key to reliably report the range of disintegration rates occurring under the various conditions in different ecosystems.

Field and mesocosm methods to test biodegradable plastic film under marine conditions.

The pollution of the natural environment, especially the world's oceans, with conventional plastic is of major concern. Biodegradable plastics are an emerging market bringing along potential chances and risks. The fate of these materials in the environment and their possible effects on organisms and ecosystems has rarely been studied systematically and is not well understood. For the marine environment, reliable field test methods and standards for assessing and certifying biodegradation to bridge laboratory respirometric data are lacking. In this work we present newly developed field tests to assess the performance of (biodegradable) plastics under natural marine conditions. These methods were successfully applied and validated in three coastal habitats (eulittoral, benthic and pelagic) and two climate zones (Mediterranean Sea and tropical Southeast Asia). Additionally, a stand-alone mesocosm test system which integrated all three habitats in one technical system at 400-L scale independent from running seawater is presented as a methodological bridge. Films of polyhydroxyalkanoate copolymer (PHA) and low density polyethylene (LD-PE) were used to validate the tests. While LD-PE remained intact, PHA disintegrated to a varying degree depending on the habitat and the climate zone. Together with the existing laboratory standard test methods, the field and mesocosm test systems presented in this work provide a 3-tier testing scheme for the reliable assessment of the biodegradation of (biodegradable) plastic in the marine environment. This toolset of tests can be adapted to other aquatic ecosystems.

Self-induced spin glass state in elemental and crystalline neodymium.

Spin glasses are a highly complex magnetic state of matter intricately linked to spin frustration and structural disorder. They exhibit no long-range order and exude aging phenomena, distinguishing them from quantum spin liquids. We report a previously unknown type of spin glass state, the spin-Q glass, observable in bulk-like crystalline metallic neodymium thick films. Using spin-polarized scanning tunneling microscopy combined with ab initio calculations and atomistic spin-dynamics simulations, we visualized the variations in atomic-scale noncolinear order and its response to magnetic field and temperature. We quantified the aging phenomena relating the glassiness to crystalline symmetry and the energy landscape. This result not only resolves the long-standing debate of the magnetism of neodymium, but also suggests that glassiness may arise in other magnetic solids lacking extrinsic disorder.

Positive association between epiphytes and competitiveness of the brown algal genus Lobophora against corals.

Observations of coral-algal competition can provide valuable information about the state of coral reef ecosystems. Here, we report contact rates and apparent competition states for six shallow lagoonal reefs in Fiji. A total of 81.4% of examined coral perimeters were found to be in contact with algae, with turf algae (54.7%) and macroalgae of the genus Lobophora (16.8%) representing the most frequently observed contacts. Turf algae competitiveness was low, with 21.8% of coral-turf contacts being won by the algae (i.e. overgrowth or bleaching of coral tissue). In contrast, Lobophora competitiveness against corals was high, with 62.5% of contacts being won by the alga. The presence of epiphytic algae on Lobophora was associated with significantly greater algal competitiveness against corals, with 75.8% and 21.1% of interactions recorded as algal wins in the presence and absence of epiphytes, respectively. Sedimentation rate, herbivorous fish biomass, and coral colony size did not have a significant effect on Lobophora-coral interactions. This research indicates a novel and important role of epiphytes in driving the outcome of coral-algal contacts.

Pseudodoping of a metallic two-dimensional material by the supporting substrate.

Charge transfers resulting from weak bondings between two-dimensional materials and the supporting substrates are often tacitly associated with their work function differences. In this context, two-dimensional materials could be normally doped at relatively low levels. Here, we demonstrate how even weak hybridization with substrates can lead to an apparent heavy doping, using the example of monolayer 1H-TaS2 grown on Au(111). Ab-initio calculations show that sizable changes in Fermi areas can arise, while the transferred charge between substrate and two-dimensional material is much smaller than the variation of Fermi areas suggests. This mechanism, which we refer to as pseudodoping, is associated with non-linear energy-dependent shifts of electronic spectra, which our scanning tunneling spectroscopy experiments reveal for clean and defective TaS2 monolayer on Au(111). The influence of pseudodoping on the formation of many-body states in two-dimensional metallic materials is analyzed, shedding light on utilizing pseudodoping to control electronic phase diagrams.

New insights on the GeSexTe1-x phase diagram from theory and experiment.

The high-pressure and low-temperature behaviour of the GeSexTe1-x system (x = 0, 0.2, 0.5, 0.75, 1) was studied using a combination of powder diffraction measurements and first-principles calculations. Compounds in the stability field of the GeTe structure type (x = 0, 0.2, 0.5) follow the high-pressure transition pathway: GeTe-I (R3m) → GeTe-II (f.c.c.) → GeTe-III (Pnma). The newly determined GeTe-III structure is isostructural to ß-GeSe, a high-pressure and high-temperature polymorph of GeSe. Pressure-dependent formation enthalpies and stability regimes of the GeSexTe1-x polymorphs were studied by DFT calculations. Hexagonal Ge4Se3Te is stable up to at least 25 GPa. Significant differences in the high-pressure and low-temperature behaviour of the GeTe-type structures and the hexagonal phase are highlighted. The role of Ge...Ge interactions is elucidated using the crystal orbital Hamilton population method. Finally, a sketch of the high-pressure phase diagram of the system is provided.

Design and performance of an ultra-high vacuum spin-polarized scanning tunneling microscope operating at 30 mK and in a vector magnetic field.

We describe the design and performance of a scanning tunneling microscope (STM) that operates at a base temperature of 30 mK in a vector magnetic field. The cryogenics is based on an ultra-high vacuum (UHV) top-loading wet dilution refrigerator that contains a vector magnet allowing for fields up to 9 T perpendicular and 4 T parallel to the sample. The STM is placed in a multi-chamber UHV system, which allows in situ preparation and exchange of samples and tips. The entire system rests on a 150-ton concrete block suspended by pneumatic isolators, which is housed in an acoustically isolated and electromagnetically shielded laboratory optimized for extremely low noise scanning probe measurements. We demonstrate the overall performance by illustrating atomic resolution and quasiparticle interference imaging and detail the vibrational noise of both the laboratory and microscope. We also determine the electron temperature via measurement of the superconducting gap of Re(0001) and illustrate magnetic field-dependent measurements of the spin excitations of individual Fe atoms on Pt(111). Finally, we demonstrate spin resolution by imaging the magnetic structure of the Fe double layer on W(110).

Toll-like receptor 3 blockade in rhinovirus-induced experimental asthma exacerbations: A randomized controlled study.

BACKGROUND: Human rhinoviruses (HRVs) commonly precipitate asthma exacerbations. Toll-like receptor 3, an innate pattern recognition receptor, is triggered by HRV, driving inflammation that can worsen asthma. OBJECTIVE: We sought to evaluate an inhibitory mAb to Toll-like receptor 3, CNTO3157, on experimental HRV-16 inoculation in healthy subjects and asthmatic patients. METHODS: In this double-blind, multicenter, randomized, parallel-group study in North America and Europe, healthy subjects and patients with mild-to-moderate stable asthma received single or multiple doses of CNTO3157 or placebo, respectively, and were then inoculated with HRV-16 within 72 hours. All subjects were monitored for respiratory symptoms, lung function, and nasal viral load. The primary end point was maximal decrease in FEV1 during 10 days after inoculation. RESULTS: In asthmatic patients (n = 63) CNTO3157 provided no protection against FEV1 decrease (least squares mean: CNTO3157 [n = 30] = -7.08% [SE, 8.15%]; placebo [n = 25] = -5.98% [SE, 8.56%]) or symptoms after inoculation. In healthy subjects (n = 12) CNTO3157 versus placebo significantly attenuated upper (P = .03) and lower (P = .02) airway symptom scores, with area-under-the-curve increases of 9.1 (15.1) versus 34.9 (17.6) and 13.0 (18.4) versus 50.4 (25.9) for the CNTO3157 (n = 8) and placebo (n = 4) groups, respectively, after inoculation. All of the severe and 4 of the nonserious asthma exacerbations occurred while receiving CNTO3157. CONCLUSION: In summary, CNTO3157 was ineffective in attenuating the effect of HRV-16 challenge on lung function, asthma control, and symptoms in asthmatic patients but suppressed cold symptoms in healthy subjects. Other approaches, including blockade of multiple pathways or antiviral agents, need to be sought for this high unmet medical need.

Inhaled Steroids and Active Smoking Drive Chronic Obstructive Pulmonary Disease Symptoms and Biomarkers to a Greater Degree Than Airflow Limitation.

RATIONALE: Chronic obstructive pulmonary disease (COPD) is a heterogeneous disease, and development of novel therapeutics requires an understanding of pathophysiologic phenotypes. OBJECTIVES: The purpose of the Airways Disease Endotyping for Personalized Therapeutics (ADEPT) study was to correlate clinical features and biomarkers with molecular characteristics in a well-profiled COPD cohort. METHODS: A total of 67 COPD subjects (forced expiratory volume in the first second of expiration [FEV1]: 45%-80% predicted) and 63 healthy smoking and nonsmoking controls underwent multiple assessments including patient questionnaires, lung function, and clinical biomarkers including fractional exhaled nitric oxide (FENO), induced sputum, and blood. MEASUREMENTS AND MAIN RESULTS: The impact of inhaled corticosteroids (ICSs), and to a lesser extent current smoking, was more associated with symptom control, exacerbation rates, and clinical biomarkers, than severity by FEV1. The ICS-treated smoking subjects were most symptomatic, with significantly elevated scores on patient-reported outcomes and more annual exacerbations (P < .05). Inhaled corticosteroid users had greater airflow obstruction and air trapping compared with non-ICS users, regardless of smoking status. Smoking, regardless of ICS use, was associated with significantly lower FENO (P < .05). Smoking, in non-ICS users, was associated with an elevated proportion of sputum neutrophils and reduced sputum macrophages. Increased serum C-reactive protein was observed in smokers but not in ICS and nonsmoking ICS users (P < .05). In contrast, only air trapping and neutrophilic inflammation increased with severity, defined by postbronchodilator FEV1. CONCLUSIONS: Compared with COPD severity by FEV1, ICS use and current smoking were better determinants of clinical characteristics and biomarkers. Use of the ADEPT COPD data promises to prove useful in defining biological phenotypes to facilitate personalized therapeutic approaches.

A Randomized, Placebo-Controlled Phase 2 Trial of CNTO 6785 in Chronic Obstructive Pulmonary Disease.

Interleukin (IL)-17A may be an underlying factor in the pathophysiology of chronic obstructive pulmonary disease (COPD). Anti-IL-17 monoclonal antibodies have been used successfully in treating several immune-mediated inflammatory diseases. This phase 2, randomized, placebo-controlled, double-blind, parallel-group, proof-of-concept study is the first clinical study evaluating the efficacy and safety of the anti-IL-17A monoclonal antibody CNTO 6785 in patients with symptomatic moderate-to-severe COPD. Patients were treated with CNTO 6785 (n = 93) or placebo (n = 94) intravenously at Weeks 0, 2, and 4 (induction), then Weeks 8 and 12, and followed till Week 24. The primary efficacy endpoint was the change from baseline in pre-bronchodilator percent-predicted forced expiratory volume in 1 second at Week 16. Samples were collected at all visits for pharmacokinetic (PK) evaluation, and standard safety assessments were performed. The mean difference in the primary efficacy endpoint between CNTO 6785 and placebo was not statistically significant (-0.49%; p = 0.599). No other efficacy endpoints demonstrated clinically or statistically significant differences with CNTO 6785 compared with placebo. CNTO 6785 was generally well tolerated; no major safety signals were detected. The most frequently reported treatment-emergent adverse events were infections and infestations; however, no notable differences were observed between CNTO 6785 and placebo in terms of rates of infections. PK results suggested that the steady state of serum CNTO 6785 concentration was reached within 16 weeks. These results suggest that IL-17A is unlikely to be a dominant driver in the pathology of, or a viable therapeutic target for, COPD. ClinicalTrials.gov Identifier: NCT01966549; EudraCT Identifier: 2012-003607-36.

Biofilm and Diatom Succession on Polyethylene (PE) and Biodegradable Plastic Bags in Two Marine Habitats: Early Signs of Degradation in the Pelagic and Benthic Zone?

The production of biodegradable plastic is increasing. Given the augmented littering of these products an increasing input into the sea is expected. Previous laboratory experiments have shown that degradation of plastic starts within days to weeks. Little is known about the early composition and activity of biofilms found on biodegradable and conventional plastic debris and its correlation to degradation in the marine environment. In this study we investigated the early formation of biofilms on plastic shopper bags and its consequences for the degradation of plastic. Samples of polyethylene and biodegradable plastic were tested in the Mediterranean Sea for 15 and 33 days. The samples were distributed equally to a shallow benthic (sedimentary seafloor at 6 m water depth) and a pelagic habitat (3 m water depth) to compare the impact of these different environments on fouling and degradation. The amount of biofilm increased on both plastic types and in both habitats. The diatom abundance and diversity differed significantly between the habitats and the plastic types. Diatoms were more abundant on samples from the pelagic zone. We anticipate that specific surface properties of the polymer types induced different biofilm communities on both plastic types. Additionally, different environmental conditions between the benthic and pelagic experimental site such as light intensity and shear forces may have influenced unequal colonisation between these habitats. The oxygen production rate was negative for all samples, indicating that the initial biofilm on marine plastic litter consumes oxygen, regardless of the plastic type or if exposed in the pelagic or the benthic zone. Mechanical tests did not reveal degradation within one month of exposure. However, scanning electron microscopy (SEM) analysis displayed potential signs of degradation on the plastic surface, which differed between both plastic types. This study indicates that the early biofilm formation and composition are affected by the plastic type and habitat. Further, it reveals that already within two weeks biodegradable plastic shows signs of degradation in the benthic and pelagic habitat.

Mixed pentele-chalcogen cationic chains from aluminum and gallium halide melts.

The reactions of tellurium or selenium with bismuth or antimony in chloridogallate and iodidoaluminate melts in the presence of group 15 trihalides as weak oxidants yielded the compounds (Sb2Te2)[GaCl4] (1), (Sb2Te2)I[AlI4] (2), (Bi2Te2)Cl[GaCl4] (3a), (Bi2Se2)Cl[GaCl4] (3b), (Sb3Te4)[GaCl4] (4), and (SbTe4)[Ga2Cl7] (5). In the crystal structures one-dimensional polymeric cations (Sb2Te2(+))n (1), (Sb2Te2(2+))n (2), (Bi2Te2(2+))n (3a), (Bi2Se2(2+))n (3b), (Sb3Te4(+))n (4), and (SbTe4(+))n (5) are present. The polymeric cationic strands in 2, 3a, 3b, and 4 consist of pentele/chalcogen dumbbells, which are connected to ladder-shaped bands. The strands in 1 and 5 consist of condensed rings that involve four-membered Sb2Te2 rings for 1, and five-membered SbTe4 rings for 5. The counteranions are the weakly coordinating [GaCl4](-), [AlI4](-), and [Ga2Cl7](-) in addition to Cl(-) and I(-) anions, which are coordinated to the atoms of the cations. The crystal structures of 1-4 are characterized by a statistical disorder in the anions with alternatively occupied positions for the Al and Ga atoms. For 4 superstructure reflections appear in the diffractions patterns, indicating a partial order. A correct assignment of the Sb and Te positions in the cation of 5 was achieved by periodic quantum-chemical calculations, which were performed via a Hartree-Fock density functional theory hybrid method. A clear preference of the 4-fold coordinated site was obtained for Sb.

Atom-specific spin mapping and buried topological states in a homologous series of topological insulators.

A topological insulator is a state of quantum matter that, while being an insulator in the bulk, hosts topologically protected electronic states at the surface. These states open the opportunity to realize a number of new applications in spintronics and quantum computing. To take advantage of their peculiar properties, topological insulators should be tuned in such a way that ideal and isolated Dirac cones are located within the topological transport regime without any scattering channels. Here we report ab-initio calculations, spin-resolved photoemission and scanning tunnelling microscopy experiments that demonstrate that the conducting states can effectively tuned within the concept of a homologous series that is formed by the binary chalcogenides (Bi(2)Te(3), Bi(2)Se(3) and Sb(2)Te(3)), with the addition of a third element of the group IV.

Intrinsic viscosities of polyelectrolytes in the absence and in the presence of extra salt: Consequences of the stepwise conversion of dextran into a polycation.

Viscosities of dilute polymer solutions were measured in capillary viscometers for samples varying in their fraction f of charged units from 0.00 to 0.90. The dependence of the logarithm of the relative viscosity on polymer concentration c is in all cases reproduced quantitatively by three characteristic parameters: [η], the intrinsic viscosity; B, a viscometric interaction parameter (related to the Huggins constant); [η], a parameter required only for polyelectrolytes at low concentrations of extra salt. In pure water [η] increases more than 80 times as the fraction f rises from zero to 0.90 and [η] starts from zero and goes up to ≈71mL/g. Upon the addition of NaCl [η] decreases by at least one order of magnitude (depending on the value of f). The observed dependences of log [η] on logcsalt can be modeled quantitatively by Boltzmann sigmoids.

Intrinsic viscosities of polyelectrolytes: determination and modeling of the effects of extra salt.

Based on early measurements of J. J. Hermans and co-workers (D. T. F. Pals, J. J. Hermans, Recl. Trav. Chim. Pays-Bas 1952, 71, 513-520; D. T. F. Pals, J. J. Hermans, J. Polym. Sci. 1950, 5, 733-734; D. T. F. Pals, J. J. Hermans, J. Polym. Sci. 1948, 3, 897-898), the present contribution demonstrates how primary data should be evaluated in order to obtain reliable intrinsic viscosities. This procedure yields detailed information on the changes of the intrinsic viscosities and of the corresponding viscometric interaction parameters caused by an increasing salinity of water. Both quantities decline from a maximum value in the pure solvent to a minimum value, which is approached in the limit of sufficiently high salt concentrations, and can be modeled quantitatively by means of a Boltzmann sigmoid. Particular attention is paid to the significance of results obtained by means of the method of isoionic dilution, proposed by J. J. Hermans and co-workers.